Repair
CNC and industrial machine repair in Wisconsin
Twenty-two kinds of equipment, repaired on site by techs from the Milwaukee, Madison and Green Bay regions. Machine tools, fabrication equipment, automation and the plant equipment around them.
What we fix
Quick answerLocalSpindle of Wisconsin repairs CNC mills and lathes, controls and drives, spindles and servo motors, press brakes and shears, punches, ironworkers, saws, fiber lasers and plasma tables, waterjets, EDMs, grinders, rolls and benders, routers, robots, PLCs, injection molding machines, conveyors, hydraulics, motors and VFDs, plus preventive maintenance. Every service page lists the symptoms we fix, what a visit covers and the brands we know.
Repair
Machine tools
Mills, lathes, EDMs, grinders and routers, plus the controls, spindles and servo motors inside them.
CNC mill & machining center repair
Verticals, horizontals and 5-axis machines: axis alarms, tool changers, lube, ballscrews and crash checks.
CNC lathe & turning center repair
Turning centers and Swiss-types: turret index, chuck pressure, bar feeders, sub-spindles and live tools.
CNC control & drive repair
Fanuc, Siemens, Heidenhain, Mazatrol, Okuma OSP and more: alarms, dead screens, lost parameters, drive faults.
Spindle repair & rebuild
Noise, heat, runout and drawbar problems found on site, and spindles rebuilt when the bearings are done.
Servo motor repair & rebuild
Overload and encoder alarms traced to the cause, drives repaired, servo motors rebuilt with new bearings and seals.
EDM repair (wire & sinker)
Threading, generator faults, filtration and dielectric, and accuracy problems on wire and sinker EDMs.
Grinder repair
Surface, cylindrical and tool grinders: wheelheads, hydraulics, ways, chatter and finish.
CNC router repair
Wood, plastic and aluminum routers: spindles, vacuum, gantry drives, tool changers and controls.
Repair
Fabrication
The equipment that cuts, bends, punches and forms metal in Wisconsin fab shops.
Press brake & shear repair
Hydraulic and electric brakes and shears: backgauges, crowning, synchronization, light curtains, blades.
Punch, turret & stamping press repair
Turret punches and stamping presses: clutch and brake, index, tooling stations, feeds and guarding.
Ironworker repair
Hydraulic ironworkers: pumps, cylinders, strippers, punch and shear stations, and worn tooling.
Band, cold & cutoff saw repair
Production saws that cut crooked or stall: guides, tension, vises, feeds and hydraulics.
Fiber laser & plasma cutter repair
Fiber and CO2 lasers and plasma tables: cut quality, motion, height control, chillers and gas.
Waterjet repair
Pumps, intensifiers, cutting heads, abrasive delivery and the motion system.
Plate roll & tube bender repair
Plate and section rolls and CNC tube benders: hydraulics, rolls, mandrels, controls.
Repair
Automation and plant
Robots, PLCs, molding presses, lines, hydraulics and drives that keep plants moving.
Robot & automation cell repair
Tending, welding and palletizing robots: faults, encoders, grippers, vision and safety circuits.
PLC & industrial controls repair
PLCs, HMIs, I/O and panels: faults found, programs backed up and lines brought back.
Injection molding machine repair
Hydraulic, electric and hybrid presses: heats, screws and checks, clamps, ejectors, controls.
Conveyor & packaging line repair
Conveyors, wrappers, case packers and line equipment: drives, belts, sensors and controls.
Hydraulic & pneumatic repair
Pumps, valves, cylinders and air systems: leaks, pressure loss, heat and slow motion.
Motor & VFD repair
Motors and drives that trip, overheat or growl: diagnosis, replacement and drive setup.
Repair
Maintenance
Scheduled visits that catch wear before it stops production.
Preventive maintenance
Scheduled visits that measure the same things every time and catch wear before it turns into a breakdown.
Start to finish
How a service call works
Every call follows the same five steps, so whoever is running the floor always knows what happens next.
Call a tech
Tell us the machine, the control and the alarm or symptom. Text a photo of the screen if you can. The person who answers knows machines.
Sort it on the phone
Some calls end right there: a parameter, a door switch, a reset order. If not, we tell you what we suspect and what we’re bringing.
Closest team rolls
The Milwaukee, Madison or Green Bay team closest to your shop takes the job, with the meters, tools and common parts it’s likely to need.
Fix the cause
We find why it failed, not just what failed, and fix it on site when we can. Parts that have to be ordered get a price and lead time before anything is ordered.
Write it down
You get a short written summary: what failed, what we did, what to watch, and whether a rebuild or a PM visit would stop it coming back.
Service areas
CNC repair across Wisconsin
Our founding teams come from the Milwaukee, Madison and Green Bay regions, and between them they cover the state, from the lakeshore to the Fox Valley to Rock County, with calls taken in Wausau, Eau Claire and La Crosse too.
Milwaukee team: Southeast Wisconsin
Madison team: South central Wisconsin
Green Bay team: Northeast Wisconsin and the Fox Valley
Central and western Wisconsin
Machine down?
Get the machine back to cutting
Call and talk to a tech about the machine, the control and the symptom. The Wisconsin team closest to you takes it from there.
