New Berlin, Wisconsin
CNC machine repair in New Berlin, WI
The New Berlin Industrial Park is one of the largest in the state, packed with machine shops, fabricators and manufacturers. Our Milwaukee team repairs and rebuilds their equipment.
What we fix in New Berlin
- CNC mills, lathes and routers for New Berlin contract shops
- Industrial machines and plant equipment for New Berlin electrical equipment plants
- Press brakes and shears for New Berlin sheet metal shops
- Fiber lasers, plasma and waterjets for New Berlin sheet metal shops
- Band, cold and cutoff saws for New Berlin shops
- PLCs and CNC controls for New Berlin plastics molders
- Robots and automation for New Berlin plastics molders
- Hydraulics, motors and drives for New Berlin plants
- Maintenance packages and on-site techs for New Berlin plants and shops
Handled by our Milwaukee team.
Quick answerLocalSpindle of Wisconsin repairs CNC machines on site in New Berlin, including the New Berlin Industrial Park and shops along Moorland Road, Lincoln Avenue and Highway 59. We fix machining centers, lathes, Swiss-types, controls, spindles, servo motors, press brakes, lasers and robots.
CNC repair in New Berlin
A big industrial park with a lot of small shops
New Berlin’s industrial park holds a wide range of manufacturers: contract machine shops, fabricators, plastics molders, electrical and electronics makers, and distribution. Many of the machine shops are small and mid-size, running a handful of machines hard, which means one machine down is a big share of their capacity.
For those shops, preventive maintenance and fast, accurate diagnosis matter more than anything. Our techs carry the meters and common parts to fix most problems on the first visit, and can set up a maintenance plan that keeps a small shop’s key machines out of trouble.
New Berlin sits right between Waukesha and Milwaukee with quick access from I-43 and Moorland Road, so it’s squarely in our Milwaukee team’s area.
LocalSpindle in New Berlin
| County | Waukesha County |
|---|---|
| Team | Milwaukee team |
| Getting there | I-43, Moorland Road, Highway 59 and Lincoln Avenue |
| Work we see | Contract machining, plastics and injection molding, sheet metal fabrication, electrical equipment |
Shops and machines
The work we see in New Berlin
| Kind of shop | Machines | Calls we get |
|---|---|---|
| Contract machine shops | Vertical mills, turning centers, Swiss-types | Axis alarms, spindles, bar feeders |
| Plastics molders | Injection molding machines, robots | Heats, check rings, robot handshakes |
| Sheet metal shops | Fiber lasers, press brakes, punches | Cut quality, bend angles, turret alignment |
Everything on the floor in New Berlin
Injection molding, conveyor and packaging repair in New Berlin
When a conveyor drive trips or a molding press loses pressure, a New Berlin plant loses product by the minute. We repair VFDs and motors, conveyor and packaging line faults, molding machine hydraulics, barrel heats and clamp problems.
For New Berlin’s plastics molders, that’s injection molding machines and robots. The usual calls: heats, check rings and robot handshakes. See injection molding machine repair and hydraulic and pneumatic repair.
Fabrication equipment repair in New Berlin
Our Milwaukee team handles the fab side of New Berlin shops too: press brake hydraulics and back gauges, shear blades, fiber laser and plasma cut problems, punch press clutches and brakes, ironworkers, saws and plate rolls.
In New Berlin, we see this most at sheet metal shops: fiber lasers, press brakes and punches, with calls for cut quality, bend angles and turret alignment. See press brake and shear repair and laser and plasma repair.
Lathe repair for New Berlin production shops
For New Berlin’s turning work, we repair turret index and clamp alarms, chuck and hydraulic pressure problems, tailstock faults, bar feeder interface issues and spindle drive alarms on Okuma, Mazak, Doosan Puma, Haas ST, Hardinge, Citizen and Star machines.
Contract machine shops in New Berlin run vertical mills, turning centers and Swiss-types, and the calls we get there are axis alarms, spindles and bar feeders. See CNC lathe repair.
Robot, PLC and automation repair in New Berlin
A robot cell that faults out or a PLC line that won’t restart stops more than one machine in New Berlin. Our Milwaukee team finds the cause, whether it’s a sensor, a safety circuit, a servo, a program or a network fault, and gets the line moving.
Our Milwaukee team handles it anywhere around New Berlin, including Elm Grove and Greenfield. See robot and automation repair and PLC repair.
Machining center repair for New Berlin shops
Mills are the busiest machines in most New Berlin shops, so they fail first. We repair tool changers and carousels, ball screws and axis drives, pallet changers, rotary tables, probing and coolant-through systems, and we leave a written note on what we found.
Shops off I-43 know the routine: call, tell us the machine and the alarm, and a tech heads over. See CNC mill repair.
Control alarm repair for New Berlin machines
An alarm you can’t clear stops a New Berlin machine cold. We work on Fanuc, Siemens, Heidenhain, Mitsubishi, Mazatrol, Okuma OSP and Haas controls, and we check cabinet cooling and filters while we’re there, because heat causes a lot of the next alarm.
That goes for the big plants in New Berlin and the two-machine shops in Big Bend alike. See CNC control repair.
Conveyor, packaging and drive repair in New Berlin
New Berlin plants run conveyors, packaging and wrapping lines, gearmotors and VFDs that can’t stop for long. Our Milwaukee team repairs drive trips, motor failures, washdown sensor problems, jams and line faults, and the PLCs that tie them together.
We cover this work across Waukesha County, from shops along I-43 to Greenfield and Elm Grove. See conveyor and packaging repair and motor and VFD repair.
Repair or rebuild in New Berlin? Straight answers
Heavy cutting and long shifts wear out spindles, servo motors and hydraulic units. We test them on the machine, repair what can be repaired in place, and rebuild spindles and servo motors with new bearings and seals when they’re done.
Shops in Hales Corners and Muskego call us for the same work. See spindle rebuilds and servo motor rebuilds.
Scheduled maintenance for New Berlin shops
Our Milwaukee team runs maintenance plans for mills, lathes, press brakes, lasers, robots and plant equipment in New Berlin. Each visit covers lube, filters, hydraulics, batteries and backups, accuracy checks and a written report. Our maintenance packages go further too: multi-week on-site tech deployment while you hire, and help finding the right maintenance people.
Plans cover shops across Waukesha County, including Franklin and Big Bend. See maintenance packages.
New machines for New Berlin shops, serviced locally
Buy a press brake, shear, fiber laser, lathe or mill from the techs who repair them. We’re an authorized dealer for HACO and other top brands, and machines we sell to New Berlin shops can come with a repair package wrapped on.
We deliver and install anywhere around New Berlin, from Elm Grove to Greenfield. See machine sales.
Why New Berlin shops call LocalSpindle
New Berlin gets a local team, not a tech flown in from out of state. Wisconsin born and raised, engineering backgrounds, one call for the whole floor, and a straight answer when a machine is worth fixing and when it isn’t.
Our reputation took 10 years of Wisconsin shop floors to build, and we’re just getting started. With the reach of several brands we represent, including the respected HACO line, New Berlin shops get new machines at prices that are hard to beat. See HACO machines.
Repair
Equipment we repair in New Berlin
Picked for New Berlin’s contract machining and plastics and injection molding. Anything else on the floor, we repair that too.
CNC mill & machining center repair in New Berlin
Verticals, horizontals and 5-axis machines: axis alarms, tool changers, lube, ballscrews and crash checks.
CNC lathe & turning center repair in New Berlin
Turning centers and Swiss-types: turret index, chuck pressure, bar feeders, sub-spindles and live tools.
CNC control & drive repair in New Berlin
Fanuc, Siemens, Heidenhain, Mazatrol, Okuma OSP and more: alarms, dead screens, lost parameters, drive faults.
Injection molding machine repair in New Berlin
Hydraulic, electric and hybrid presses: heats, screws and checks, clamps, ejectors, controls.
Robot & automation cell repair in New Berlin
Tending, welding and palletizing robots: faults, encoders, grippers, vision and safety circuits.
Fiber laser & plasma cutter repair in New Berlin
Fiber and CO2 lasers and plasma tables: cut quality, motion, height control, chillers and gas.
Press brake & shear repair in New Berlin
Hydraulic and electric brakes and shears: backgauges, crowning, synchronization, light curtains, blades.
Punch, turret & stamping press repair in New Berlin
Turret punches and stamping presses: clutch and brake, index, tooling stations, feeds and guarding.
Example call in New Berlin
Swiss-type lathe parts drifting out of tolerance
The call
A contract shop in the New Berlin Industrial Park had a Swiss-type whose part diameters drifted over a run.
What we did
- Diagnose. The guide bushing was worn and its adjustment had been opened up to compensate.
- Fix. Replaced the guide bushing, set it to the bar stock, and checked collets and lubrication.
- Prove. Ran a production lot with diameters steady.
The result. Back in tolerance the same day.
A typical call, written to show how we work. It isn’t a specific customer.
Talk to a Wisconsin tech
Machine down in New Berlin?
Call and a tech will tell you what we’d check first, then our Milwaukee team heads your way.
- You talk to a tech, not a call center
- The closest Wisconsin team takes the job
- Straight answer on repair, rebuild or replace
Yes, New Berlin is in our regular service area. Our Milwaukee team handles CNC repair, rebuilds and maintenance for New Berlin shops, from one-machine job shops to full plants.
Yes. We help New Berlin shops retrofit older machines with new controls, drives, motors and safety systems when the iron is still good, and we’ll tell you honestly when a retrofit makes more sense than a new machine.
Yes. Lights-out only works when the machine is reliable. We set up and fix the automation around it, like robots, bar feeders, pallet changers and probing, and put the machine on a maintenance plan so it runs all night.
Yes. Press brakes, shears, fiber lasers and CNC machines, sold and installed by the same Wisconsin techs who service them, with a repair package available. Ask about current HACO models for New Berlin.
Yes. Our Milwaukee team repairs waterjets in New Berlin: high-pressure pumps and intensifiers, seals and check valves, cutting heads, abrasive delivery and motion. See waterjet repair.
Yes. Older machines are a big part of what we do: Chicago and Cincinnati press brakes, older Mazak, Okuma and Haas machines, and controls that are no longer made. We find parts, repair boards and drives, or quote a retrofit.
Yes. Multi-week on-site deployment is part of our maintenance packages. A tech works at your New Berlin plant while you hire, and we’ll help you find and vet candidates.
Yes, regularly. It’s in our Milwaukee team’s area.
Yes, including guide bushings, collets, synchronization and bar feeders.
Yes. Plans scale from a couple of machines to a full floor.
Yes, hydraulic, electric and hybrid presses.
Yes. We build plans around your key machines, with the same checks every visit and a written report.
Nearby
Also serving near New Berlin
Smaller towns near New Berlin we serve: Muskego, Big Bend, Greenfield, Hales Corners, Franklin and Elm Grove. Small shops count on us as much as big plants do.
Machine down?
Get your New Berlin shop back to cutting
Call with the machine, the control and what it’s doing. Our Milwaukee team takes it from there.
