Milwaukee team: Southeast Wisconsin
Robot and automation repair in Milwaukee, WI
Milwaukee-area plants run robots tending machines, welding and palletizing, all tied together with PLCs. Our Milwaukee team troubleshoots Fanuc, Yaskawa Motoman, ABB and Kuka robots and the cells around them.
Robot and automation repair in Milwaukee
- Servo and encoder alarms
- Lost positions after a crash
- Gripper and vacuum problems
- Safety fence and scanner faults
- Robot to machine handshake errors
Quick answerLocalSpindle of Wisconsin provides robot and automation repair in Milwaukee and across Southeast Wisconsin. Our Milwaukee team covers Milwaukee, Waukesha, Washington, Racine, Kenosha and Sheboygan counties, on site at your shop. We fix servo and encoder faults, lost positions, grippers and end-of-arm tooling, vision problems, safety circuits, and communication between robots, PLCs and machine tools.
Milwaukee robot and automation repair
Robot and automation repair for Milwaukee shops
Most robot cell stops in southeast Wisconsin come down to a sensor, a gripper, a safety input, a cable dress pack or a lost position. We find the cause, fix it and leave notes your maintenance people can use next time.
Robot and automation repair across the Milwaukee area
Food plants in Milwaukee, machine-tending cells in Waukesha County and welding cells along I-94 all get the same Milwaukee team, including the Allen-Bradley and Siemens PLCs that run the line.
Symptoms
Robot and automation repair calls we get in Milwaukee
What shops tell us on the phone, and what it usually turns out to be.
| What you see | What it usually is |
|---|---|
| Servo or encoder alarm on an axis | Worn dress pack cable, connector, motor or a dead encoder battery. |
| Robot lost its positions | Encoder battery, a crash, or mastering data lost. |
| Gripper drops parts | Air pressure, worn fingers, a vacuum leak or a sensor out of adjustment. |
| Cell stops waiting on a signal | Handshake between robot, PLC and machine; often a sensor or timing. |
On site
What we check on robot and automation repair visits in Milwaukee
- Arm axes, reducers and motors
- Dress pack cables and connectors
- Encoder batteries and mastering
- End-of-arm tooling, grippers and vacuum
- Vision cameras, lighting and calibration
How it works
Milwaukee robot and automation repair step 1: back up
Robot programs and settings saved.
Milwaukee robot and automation repair step 2: trace the stop
Arm, tooling, I/O or safety.
Milwaukee robot and automation repair step 3: fix and remaster
Repair, then positions and TCP verified.
Milwaukee robot and automation repair step 4: run the cell
Full cycle proven.
Towns
Robot and automation repair near Milwaukee
The Milwaukee team covers Milwaukee, Waukesha, Washington, Racine, Kenosha and Sheboygan counties.
FAQ
Robot and automation repair questions from Milwaukee shops
Still wondering? Call (414) 381-0127 and ask a tech.
LocalSpindle of Wisconsin. Our Milwaukee team handles robot and automation repair on site across Milwaukee, Waukesha, Washington, Racine, Kenosha and Sheboygan counties.
Yes. The Milwaukee team covers Waukesha, New Berlin, Menomonee Falls, Germantown, West Allis and the towns around them.
Often, yes. Tell us the machine, control and symptom when you call so the tech brings the right tools and parts.
Yes. Scheduled visits from the Milwaukee team, with the same measurements every time and a written report.
Fanuc, Motoman (Yaskawa), ABB, Kuka, Kawasaki, Nachi, Denso, Epson, Staubli, Universal Robots and others.
Yes, after a crash or lost encoder data.
Machine down?
Need robot and automation repair in Milwaukee? Call the Milwaukee team
Call and talk to a tech about the machine, the control and the symptom. The Wisconsin team closest to you takes it from there.
