Green Bay team: Northeast Wisconsin and the Fox Valley
Robot and automation repair in Green Bay, WI
Fox Valley plants run robotic welding, palletizing and converting lines. Our Green Bay team repairs robots, PLCs, drives and safety systems on site across northeast Wisconsin.
Robot and automation repair in Green Bay
- Servo and encoder alarms
- Lost positions after a crash
- Gripper and vacuum problems
- Safety fence and scanner faults
- Robot to machine handshake errors
Quick answerLocalSpindle of Wisconsin provides robot and automation repair in Green Bay and across Northeast Wisconsin and the Fox Valley. Our Green Bay team covers Brown, Outagamie, Winnebago, Fond du Lac and Manitowoc counties, on site at your shop. We fix servo and encoder faults, lost positions, grippers and end-of-arm tooling, vision problems, safety circuits, and communication between robots, PLCs and machine tools.
Green Bay robot and automation repair
Robot and automation repair for Green Bay shops
Robotic welding cells for trucks and heavy equipment fight spatter, heat and cable wear. Paper and food lines fight dust and washdown. We fix the fault and point out the wear that will cause the next one.
Robot and automation repair across the Green Bay and the Fox Valley
Green Bay, De Pere, Appleton, Oshkosh and Manitowoc plants get Green Bay techs for robots, PLC lines, servo drives and motors.
Symptoms
Robot and automation repair calls we get in Green Bay
What shops tell us on the phone, and what it usually turns out to be.
| What you see | What it usually is |
|---|---|
| Vision misses parts | Lighting, lens, calibration or part presentation. |
| Servo or encoder alarm on an axis | Worn dress pack cable, connector, motor or a dead encoder battery. |
| Cell stops waiting on a signal | Handshake between robot, PLC and machine; often a sensor or timing. |
| Robot lost its positions | Encoder battery, a crash, or mastering data lost. |
On site
What we check on robot and automation repair visits in Green Bay
- Arm axes, reducers and motors
- Encoder batteries and mastering
- Vision cameras, lighting and calibration
- Safety fences, gates, light curtains and scanners
- Dress pack cables and connectors
In the truck
What our Green Bay techs bring for robot and automation repair
So more fixes happen on the first visit.
- Teach pendant know-how for major brands
- Meters for I/O and safety circuits
- Encoder batteries
- Common sensors, air fittings and cables
- Laptop for backups
Towns
Robot and automation repair near Green Bay
The Green Bay team covers Brown, Outagamie, Winnebago, Fond du Lac and Manitowoc counties.
FAQ
Robot and automation repair questions from Green Bay shops
Still wondering? Call (414) 381-0127 and ask a tech.
LocalSpindle of Wisconsin. Our Green Bay team handles robot and automation repair on site across Brown, Outagamie, Winnebago, Fond du Lac and Manitowoc counties.
Yes. The Green Bay team covers De Pere, Appleton, Neenah and Menasha, Oshkosh, Fond du Lac and the towns around them.
Often, yes. Tell us the machine, control and symptom when you call so the tech brings the right tools and parts.
Yes. Scheduled visits from the Green Bay team, with the same measurements every time and a written report.
Yes, every time we can.
Yes, fences, gates, curtains, scanners and safety controllers.
Machine down?
Need robot and automation repair in Green Bay? Call the Green Bay team
Call and talk to a tech about the machine, the control and the symptom. The Wisconsin team closest to you takes it from there.
