Okuma · Wisconsin
Okuma lathe, machining center and OSP control repair in Wisconsin
Okuma LB and Genos lathes, MB and MA machining centers, multitasking machines and OSP controls repaired on site by Wisconsin techs.
Okuma work we do
- LB, LT and Genos lathes
- MB, MA and Genos machining centers
- OSP control troubleshooting
- Turrets, spindles and tool changers
- Thermal and accuracy problems
Quick answerLocalSpindle of Wisconsin repairs Okuma machines across the state, including LB, LT and Genos lathes, MB, MA and Genos machining centers, and multitasking machines, plus the Okuma OSP controls on them. We fix turret and tool changer faults, spindles, axis alarms, hydraulics and OSP control problems.
Okuma repair
Okuma builds its own control
Okuma is unusual: the machine and the OSP control come from the same builder. That makes the machines well integrated, and it means troubleshooting goes through OSP diagnostics. We work on OSP controls from older generations to current ones.
Lathes and machining centers
Okuma lathes are workhorses in Wisconsin shops. Turret index, chuck pressure and hydraulics are the common calls. On machining centers, it’s tool changers, spindles and axes. Okuma’s thermal compensation helps accuracy, and when parts drift we check whether the compensation and the sensors behind it are working.
Common problems
Okuma problems we see
| What you’re seeing | Usually |
|---|---|
| Turret alarms | Hydraulics, coupling or sensors |
| Spindle alarms | Drive, motor or encoder |
| Overtravel or position alarms | Encoder, home or mechanics |
| ATC faults | Alignment, sensors or air |
| Thermal drift | Compensation sensors or warm-up |
| OSP screen problems | Power, display or PC side of the control |
Services
Okuma repair services
CNC lathe & turning center repair
Turning centers and Swiss-types: turret index, chuck pressure, bar feeders, sub-spindles and live tools.
CNC mill & machining center repair
Verticals, horizontals and 5-axis machines: axis alarms, tool changers, lube, ballscrews and crash checks.
CNC control & drive repair
Fanuc, Siemens, Heidenhain, Mazatrol, Okuma OSP and more: alarms, dead screens, lost parameters, drive faults.
Spindle repair & rebuild
Noise, heat, runout and drawbar problems found on site, and spindles rebuilt when the bearings are done.
Yes, lathes and machining centers.
We rebuild or arrange replacement.
Yes, sensors and settings.
More brands
Related brands
Service areas
CNC repair across Wisconsin
Our founding teams come from the Milwaukee, Madison and Green Bay regions, and between them they cover the state, from the lakeshore to the Fox Valley to Rock County, with calls taken in Wausau, Eau Claire and La Crosse too.
Milwaukee team: Southeast Wisconsin
Madison team: South central Wisconsin
Green Bay team: Northeast Wisconsin and the Fox Valley
Central and western Wisconsin
Machine down?
Okuma machine down? Call a tech
Call and talk to a tech about the machine, the control and the symptom. The Wisconsin team closest to you takes it from there.
